This Crochet Christmas Tree Décor Pattern creates three elegant covers for 3-inch red satin balls. Delicate threadwork, open lace spaces, picots, and satin ribbon combine to make ornaments with a polished heirloom look. The project suits crocheters who enjoy detailed motifs and careful shaping, and the finished balls can decorate a Christmas tree, embellish a gift, or become part of a festive centerpiece. For another seasonal handmade decoration, pair these ornaments with a crochet bear ornament.
Why You’ll Love This Crochet Project

- Three coordinated designs: The pattern includes three distinct crochet ball covers, so a single project produces variety without requiring different color schemes.
- Elegant thread texture: Size 10 crochet thread creates crisp lacework, while picots and chain spaces add an airy, dimensional finish.
- Useful stitch practice: You will work with single crochet, double crochet, half double crochet, double treble crochet, chain spaces, picots, and joined rounds.
- Gift-ready results: The covered satin balls make thoughtful handmade ornaments for family, friends, teachers, or hosts.
- Flexible display options: Hang the finished pieces individually, group them on a tree, or place them in a decorative holiday bowl.
Crochet Mimi Tip: Keep each finished cover with its matching satin ball while working. The three designs use different construction methods, so labeling the components prevents accidental mixing. You may also find Beginner Friendly Crochet Pattern Red Roses useful.
Before You Start Crocheting
The project makes three crochet-covered 3-inch red satin balls:
- Ball Number 1: A single, highly detailed lace cover worked through 19 rounds.
- Ball Number 2: Two crocheted halves joined around the satin ball, with a crocheted chain hanger.
- Ball Number 3: Two crocheted halves joined around the satin ball, finished with a ribbon hanger.
The construction sequence is important. Ball Number 1 is crocheted as one shaped cover and gathered around the ball. Balls Number 2 and 3 are worked as matching halves, then sewn or slip-stitched together around the satin ball.
The pattern uses US crochet terminology. The 1.5 mm [US 7] steel hook is used for all three designs. Work with steady tension so the lace spaces remain open but the covers still fit securely around the satin balls.
Abbreviations and Pattern Notes
- ch: chain
- sc: single crochet
- hdc: half double crochet
- dc: double crochet
- dtr: double treble crochet
- slip st: slip stitch
- yo: yarn over
- Picot: ch 3, slip st in top of last st made.
- An asterisk
*or double asterisk**indicates that the instructions following it are repeated as specified. - Directions in brackets
[ ]are worked the number of times indicated.
Materials You’ll Need
Ball Number 1 Center of Photo
- AUNT LYDIA’S® Classic Crochet Thread, Size 10: 1 ball, White
- Steel crochet hook: 1.5 mm [US 7]
- Tapestry needle
- 1/8” x 25” double-faced satin ribbon
- 2” long pearl teardrop corsage pin
- 3” red satin ball
Ball Number 2 Top of Photo
- Steel crochet hook: 1.5 mm [US 7]
- Tapestry needle
- 1/8” x 7” double-faced satin ribbon
- 2” long pearl teardrop corsage pin
- 3” red satin ball
Ball Number 3 Bottom of Photo
- Steel crochet hook: 1.5 mm [US 7]
- Tapestry needle
- 1/8” x 7” double-faced satin ribbon
- 2” long pearl teardrop corsage pin
- 3” red satin ball
The tapestry needle is used for weaving in ends and joining the two-part covers. The satin ribbon creates a gathered finish or hanging loop, while the pearl teardrop corsage pin helps anchor the hanger at the top of the ball.
Step-by-Step Crochet Instructions

Special Stitch and Pattern Notes
Picot = ch 3, slip st in top of last st made.
* or ** means repeat whatever follows as indicated.
[ ] means work the directions in brackets the number of times specified.
Ball Number 1 Center of Photo
Ball Cover
Beginning: Ch 6; join with a slip st to form a ring.
Round 1: Ch 5 (counts as dc, ch-2), [dc in ring, ch 2] 7 times; join with a slip st in 3rd ch of ch-5.
Round 2: Slip st in next space, ch 5 (counts as dtr), 3 dtr in same space, ch 3, [4 dtr in next space, ch 3] 7 times; join with a slip st in top of ch-5.
Round 3: Slip st in next dtr, [sc between 2nd and 3rd dtr, (4 dc, ch 2, 4 dc) in next ch-3 space] 8 times; join in first sc.
Round 4: Slip st in next 4 dc and into ch-2 space, ch 5 (counts as dtr), (dtr, [ch 3, 2 dtr] 3 times) all in same space, * (4 dc, ch 2, 4 dc) in next ch-2 space **, ([2 dtr, ch 3] 3 times, 2 dtr) all in next ch-2 space; repeat from * around, end at **; join in top of ch-5.
Round 5: Ch 1, * sc between next 2 dtr, (3 dc, [picot, 3 dc] twice) all in next ch-3 space; repeat from * twice more; sc between next 2 dtr, sc between dtr and dc, (4 dc, picot, 4 dc) in next ch-2 space, sc between dc and dtr; repeat from * around; join in first sc. Fasten off.
Round 6: Join thread in 3rd picot of Round 5; ch 1, sc in picot, * ch 3, sc in next picot, ch 5, sc in next picot, ch 3, pull up a loop in each of the next 3 picots, yo and draw through all 4 loops on hook, ch 3, sc in next picot, ch 5 **, sc in next picot; repeat from * around, end at **; join.
Round 7: Ch 1, sc in first sc, * ch 3, sc in next sc, ch 5, hdc in next sc, ch 3, dc in next joined sts, ch 3, hdc in next sc, ch 5 **, sc in next sc; repeat from * around, end at **; join.
Round 8: Ch 1, sc in first sc, * ch 3, sc in next space, ch 3, sc in next sc, [ch 3, sc] twice in ch-5 space, ch 3, sc in next hdc, ch 3, sc in next space, ch 3, sc in next dc, ch 3, sc in next space, ch 3, sc in next hdc, [ch 3, sc] twice in ch-5 space **, ch 3, sc in next sc; repeat from * around, end at **; (ch 1, hdc) in first sc to join and form last loop.
Rounds 9–17: Ch 1, sc in loop just formed, * ch 3, sc in next ch-3 loop; repeat from * around, ending with (ch 1, hdc) in first sc to join and form last loop.
Round 18: Repeat Round 17 ending with ch 3; join in first sc.
Round 19: * (Sc, picot, sc) in next ch-3 loop; repeat from * around; join in first sc. Fasten off. Weave in ends.
To Finish
- Insert satin ball into crocheted piece, placing the center hole at the bottom of the crocheted piece on the center bottom of the ball.
- Weave the 18” length of ribbon through Round 15, draw up the ribbon very tightly, and knot. Tie a bow on top of the knot. Trim the ribbon ends.
- Insert the teardrop pearl corsage pin through the ends of the 7” length of ribbon and into the center top of the ball to form the hanger loop.
Ball Number 2 Top of Photo
Ball Cover: First Half
Beginning: Ch 12; join with a slip st to form a ring.
Round 1: Ch 1, 24 sc in ring; join with a slip st in first sc.
Round 2: Ch 10 (counts as dtr, ch-5), skip next sc, [sc in next sc, ch 5, skip next sc, dtr in next sc, ch 5, skip next sc] 5 times, sc in next sc, ch 5, skip next sc; join with a slip st in 5th ch of ch-10.
Round 3: Ch 1, sc in same st as joining, ch 8, [sc in next dtr, ch 8] 5 times; join in first sc.
Round 4: Ch 1, sc in first sc, * sc in first ch of ch-8, ch 8, skip next 6 ch, sc in next ch **, sc in next sc; repeat from * around, end at **; join in first sc – 18 sc.
Round 5: Ch 1, sc in first 2 sc, * sc in first ch of ch-8, ch 8, skip next 6 ch, sc in next ch **, sc in next 3 sc; repeat from * to last sc, end at **; sc in last sc; join – 30 sc.
Round 6: Ch 1, sc in first 3 sc, * sc in first ch of ch-8, ch 8, skip next 6 ch, sc in next ch **, sc in next 5 sc; repeat from * to last 2 sc, end at **; sc in last 2 sc; join – 42 sc.
Round 7: Slip st in next 3 sc, slip st in next 4 ch, ch 1, sc in same loop, ch 12, * sc in next loop, ch 12; repeat from * around; join in first sc.
Round 8: Ch 1, sc in first sc, sc in each ch and sc around; join – 78 sc.
Round 9: Ch 1, sc in each sc around; join. Fasten off. Weave in ends.
Second Half
Work the same as the First Half, leaving a 48” thread tail at the end of Round 9 to sew the halves together and to make the hanger loop.
Finishing
- Place the crocheted halves over the satin ball, matching the crochet design pattern and matching stitches. Sew or slip st the halves together with the length of thread left on the Second Half.
- With the remaining thread left after sewing, use the crochet hook to anchor the thread with a slip st at the center top of the ball; ch 40; join to the first ch to form a loop, being careful not to twist the chain. Fasten off.
- Open the hanger loop at the base. Insert the teardrop pearl corsage pin into the satin ball at the center top to give firm hold to the hanger loop. Weave in ends.
Ball Number 3 Bottom of Photo
Ball Cover: First Half
Beginning: Ch 12; join with a slip st to form a ring.
Round 1: Ch 3 (counts as dc), 23 dc in ring; join with a slip st to top of ch-3.
Round 2: Ch 6 (counts as dc, ch 3), skip next dc, [dc in next dc, ch 3, skip next dc] 11 times; join in 3rd ch of ch-6.
Round 3: Ch 3, 5 dc in next ch-3 space, [dc in next dc, 5 dc in next ch-3 space] 11 times; join.
Round 4: Ch 3, 2 dc in same st as joining, ch 3, skip next 5 dc, [3 dc in next dc, ch 3, skip next 5 dc] 11 times; join.
Rounds 5 and 6: Ch 3, dc in next 2 dc, ch 3, [dc in next 3 dc, ch 3] 11 times; join.
Round 7: Ch 3, dc in next 2 dc, 3 dc in next ch-3 space, [dc in next 3 dc, 3 dc in next ch-3 space] 11 times; join. Fasten off. Weave in ends.
Second Half
Work the same as the First Half, leaving a 48” thread tail at the end of Round 7.
Finishing
- Place the crocheted halves over the satin ball, matching the crochet design pattern and matching stitches. Sew or slip st the halves together with the length of thread left on the Second Half.
- Insert the teardrop pearl corsage pin through the ends of the 7” length of ribbon and into the center top of the ball to form the hanger loop.
Ways to Display Your Finished Crochet

- Hang all three ornaments together on a Christmas tree to create a coordinated lace-and-satin grouping.
- Use one ornament as a decorative package topper, securing it to a ribbon-wrapped gift.
- Arrange the balls in a shallow holiday bowl or on a mirrored tray for a table display.
- Place the ornaments at different heights on a small tabletop tree so the three lace patterns remain visible.
- Give the set as a handmade holiday gift, keeping the designs together as a matching collection.
- For a different seasonal crochet display later in the year, a spooky crochet tree decoration offers a playful contrast.
Caring for Your Crochet Project
These ornaments contain delicate threadwork, satin, and corsage pins, so handle them gently.
- Dust the crochet surface with a soft, dry brush or a clean microfiber cloth.
- Avoid soaking, machine washing, or vigorous rubbing, which can distort the lace and affect the satin ball.
- If a small spot appears, use minimal moisture on a cloth and dab carefully rather than scrubbing.
- Store each ornament separately in acid-free tissue or a soft cloth pouch to protect the picots and ribbon.
- Keep the ornaments away from excessive heat and direct sunlight, which may affect the satin finish and thread color.
- Store them where the pearl pins cannot catch on other decorations.
- Before hanging the ornaments, check that the ribbon and crocheted hanger remain firmly anchored.
Tips for Better Results
- Use the specified fine hook and thread. The 1.5 mm [US 7] steel hook helps create the open lace structure while maintaining a controlled fabric.
- Mark the beginning of complicated rounds. Ball Number 1 has several detailed repeats, and a removable marker can help you identify the joining point.
- Count the repeated groups. In Ball Number 2, the stitch totals of 18 sc, 30 sc, 42 sc, and 78 sc provide useful checkpoints.
- Keep chain tension consistent. Chain spaces form much of the ornament’s shape. Very tight chains can make the cover contract, while loose chains can make it unstable.
- Form picots carefully. For a neat edge, make the ch 3 evenly and insert the slip stitch into the top of the last stitch made.
- Leave the required thread tails. The 48” tails for Ball Numbers 2 and 3 are needed for joining and finishing; do not fasten off short.
- Match stitches before joining halves. For Balls Number 2 and 3, align the crochet design and corresponding stitches around the satin ball before sewing or slip stitching.
- Secure the ends thoroughly. Weave in thread ends without pulling so tightly that the lace puckers.
For another detailed thread project with repeated motifs, consider a beginner-friendly mandala crochet doily as a separate practice piece.
Color and Styling Variations
The approved pattern uses White AUNT LYDIA’S® Classic Crochet Thread with red satin balls, but the finished ornaments can be styled in several optional ways.
- Use ivory thread with deep red, burgundy, or forest-green satin balls for a warmer traditional palette.
- Try metallic-looking satin ribbon with white thread for a formal tree.
- Coordinate all three ornaments with one ribbon color, or use slightly different ribbon shades for a layered display.
- Combine the red satin balls with a white-and-red holiday centerpiece.
- For a softer winter theme, pair white crochet covers with silver or icy-blue satin balls.
Changing thread weight or hook size is optional and may affect the lace texture, finished fit, stitch definition, and amount of thread required. If you substitute materials, test the cover around the intended satin ball before making all three designs. Floral-inspired decorations can also be added to a broader handmade display, such as a crochet flower wreath for a contrasting seasonal arrangement.
Frequently Asked Questions
Is this pattern suitable for a beginner?
It is best suited to a crocheter who is comfortable with joined rounds, chain spaces, and basic crochet stitches. Ball Numbers 2 and 3 have more repetitive shaping, while Ball Number 1 includes detailed lace repeats and picots.
What hook size does the pattern use?
All three ball covers use a steel crochet hook measuring 1.5 mm [US 7].
What thread is specified?
Ball Number 1 specifies AUNT LYDIA’S® Classic Crochet Thread, Size 10, one ball in White. The supplied materials list does not separately specify a thread quantity for Ball Numbers 2 and 3.
How many satin balls are needed?
You need three 3-inch red satin balls: one for each design.
Why do Balls Number 2 and 3 require two halves?
Those designs are constructed as matching halves. After both halves are crocheted, they are placed over the satin ball and sewn or slip-stitched together.
How is the hanger made for Ball Number 2?
The remaining thread from the 48” tail is anchored at the center top, then used to make a chain of 40. The chain is joined to its first chain to form a loop, and the pearl corsage pin provides firm hold at the base.
Can the colors be changed?
Yes. Changing the thread or satin ball color is an optional styling choice, but keep the thread and hook combination consistent if you want a similar lace structure and fit.
How should the finished ornaments be cleaned?
Dust them gently and avoid soaking or machine washing. The satin balls, ribbons, lace, and pearl pins should be protected from excessive moisture and friction.
Can the ornaments be displayed outdoors?
The pattern is intended for decorative indoor use. Keep the finished ornaments away from rain, humidity, excessive heat, and direct sunlight.
Conclusion
These three crochet Christmas tree ornaments combine fine thread lace, red satin, ribbon, and pearl details into a coordinated handmade set. Follow the round-by-round instructions carefully, preserve the longer thread tails for assembly, and handle the finished pieces gently during storage. For more seasonal inspiration, browse these free crochet Christmas tree patterns or try a flat Christmas tree crochet pattern.






