This Crochet Cross Stitch Christmas Stockings Pattern creates a classic handmade decoration with a ribbed cuff, sturdy single-crochet body, shaped heel and toe, and colorful cross-stitch embroidery. Choose the snowman, Santa, or tree version to personalize a mantel, staircase, gift basket, or holiday display. The construction is approachable for crocheters familiar with single crochet and slip stitches, while the embroidery adds a rewarding finishing detail. For another festive handmade accent, pair the stocking with a crochet bear Christmas ornament.
Why You’ll Love This Crochet Project

- Three festive design options: The supplied colorways create a snowman, Santa, or Christmas tree stocking.
- Useful construction practice: You will work a ribbed cuff, joined rounds, heel shaping, toe decreases, and a hanging loop.
- Personalized holiday décor: The cross-stitch charts make each stocking feel handmade and distinctive.
- Giftable and display-ready: Finished stockings can hold small gifts, treats, or keepsakes.
- A practical introduction to embroidery: The stocking fabric provides a clear single-crochet grid for cross-stitch placement.
Crochet Mimi Tip: Keep the stocking front facing you while planning the embroidery placement so the design remains centered and upright.
Before You Start Crocheting
This pattern makes one crocheted Christmas stocking, completed in stages: cuff, leg, heel, joined foot, toe, hanging loop, and cross-stitch embroidery. The cuff is worked first as a long strip in back-loop slip stitches, then joined into a tube. Single crochet is worked around one edge to form the leg.
The heel is worked separately across part of the stocking, shaped with decreases, and then rejoined to the instep. After the foot is completed, the toe is decreased evenly until 12 stitches remain. Finally, a chain loop is sewn to the stocking and the appropriate chart is embroidered onto the front.
The stated measurements include a 14″ [35.5 cm] cuff, a 9″ [23 cm] leg measurement from the bottom of the cuff, a 2″ [5 cm] heel section, and a 5½” [14 cm] measurement from the joining round through the foot.
Useful abbreviations include:
- ch: chain
- sl st: slip stitch
- sc: single crochet
- sc2tog: single crochet two stitches together
- RS: right side
- WS: wrong side
- rem: remaining
- pm: place marker
- MC: main color
Materials You’ll Need
Yarn: Bernat® Super Value™
Choose one version:
Version I Snowman
- Main Color (MC): Forest Green (53243), 1 ball
- Contrast A: Cherry Red (53436), 1 ball
- Contrast B: Winter White (07407), 1 ball
- Contrast C: Black (07421), 1 ball
Version II Santa
- Main Color (MC): Teal Heather (53203), 1 ball
- Contrast A: Oatmeal (53010), 1 ball
- Contrast B: Cherry Red (53436), 1 ball
- Contrast C: Winter White (07407), 1 ball
- Contrast D: Black (07421), 1 ball
Version II Tree
- Main Color (MC): Oatmeal (53010), 1 ball
- Contrast A: Taupe (53012), 1 ball
- Contrast B: Forest Green (53243), 1 ball
- Contrast C: Cherry Red (53436), 1 ball
Notions and Tools
- Size U.S. H/8 (5 mm) crochet hook or size needed to obtain gauge
- Stitch marker
- Embroidery needle

Step-by-Step Crochet Instructions
The instructions below retain the supplied construction sequence and stitch counts. Work the selected color version, using A and MC as identified in the materials list.
Cuff
With A, ch 6.
- 1st row: (RS). 1 sl st in 2nd ch from hook. 1 sl st in each ch to end of chain. Turn. 5 sl sts.
- 2nd row: Working in back loops only, 1 sl st in each sl st across. Turn.
- Repeat the 2nd row until work from beginning measures 14″ [35.5 cm], ending on a WS row.
Join Cuff
Working in back loops only, sl st last row and remaining loops of foundation ch together. Fasten off.
Leg
Join MC with sl st to side edge of Cuff.
- 1st rnd: Ch 1. Work 46 sc evenly around side edge of Cuff. Join with sl st to first sc. Turn.
- 2nd rnd: Ch 1. 1 sc in each sc around. Join with sl st to first sc. Turn.
- Repeat the 2nd rnd until work from bottom of Cuff measures 9″ [23 cm]. Fasten off.
Heel
With RS facing, join A with sl st to first sc.
- 1st row: Ch 1. 1 sc in same sp as last sl st. 1 sc in each of next 22 sc. Turn. Leave remaining sts unworked.
- 2nd row: Ch 1. 1 sc in each sc to end of row. Turn.
- Repeat the 2nd row for 2″ [5 cm], ending on a WS row.
Shape Heel
- 1st row: (RS). Ch 1. 1 sc in each of next 15 sc. Sc2tog. 1 sc in next sc. Turn. Leave remaining sts unworked.
- 2nd row: Ch 1. 1 sc in each of first 9 sts. Sc2tog. 1 sc in next sc. Turn.
- 3rd row: Ch 1. 1 sc in each of first 10 sts. Sc2tog. 1 sc in next sc. Turn.
- 4th row: Ch 1. 1 sc in each of first 11 sts. Sc2tog. 1 sc in next sc. Turn.
- 5th row: Ch 1. 1 sc in each of first 12 sts. Sc2tog. 1 sc in next sc. Turn.
- 6th row: Ch 1. 1 sc in each of first 13 sts. Sc2tog. 1 sc in next sc. Turn.
- 7th and 8th rows: Ch 1. 1 sc in each of first 14 sts. Sc2tog. Turn. 15 sts.
Fasten off at end of 8th row.
Joining Round After Heel
With RS facing, join MC with sl st at left side of Heel Base.
Ch 1. 1 sc in each of next 23 sc of instep. Place marker. Work 7 sc up right side of Heel, 1 sc in each of next 15 sc across end of Heel, and 7 sc down left side of Heel. Join with sl st to first sc. Turn. 52 sc.
2nd rnd: Ch 1. 1 sc in each sc to marker. Sc2tog. 1 sc in each sc to last 2 sc. Sc2tog. Join with sl st to first sc. Turn.
Repeat the 2nd rnd until 44 sts remain.
Foot
Next rnd: Ch 1. 1 sc in each sc around. Join with sl st to first sc. Turn.
Repeat the last rnd until work from joining rnd measures 5½” [14 cm].
Join A at end of last row. Break MC.
Shape Toe
1st rnd: With A, ch 1. (1 sc in each of next 9 sc. Sc2tog) 4 times. Join with sl st to first sc. Turn.
2nd rnd: Ch 1. (1 sc in each of next 8 sc. Sc2tog) 4 times. Join with sl st to first sc. Turn.
Continue in the same manner, decreasing 4 sts on every row until 12 sts remain.
Break yarn, leaving a long end. Draw end tightly through remaining sts and fasten securely.
Hanging Loop
With MC, ch 25.
Sl st in 2nd ch from hook and each ch to end of chain. Fasten off.
Fold in half and sew in position.
Finishing: Cross-Stitch Embroidery Placement
Placing a piece of cardboard into your stocking will help prevent catching stitches as you embroider.
Measure approximately 2″ [5 cm] down from the beginning of the Leg and mark the center sc of the Stocking Front. Line up the marked stitch with the center stitch of the chart and work the cross-stitch embroidery. Each square of the chart represents 1 sc.
Use the corresponding chart for the selected version:
- Version I: Cross stitch Chart I to stocking as shown in picture.
- Version II: Cross stitch Chart II to stocking as shown in picture.
- Version III: Cross stitch Chart III to stocking as shown in picture.
For a broader floral and handmade holiday collection, a crochet flower wreath pattern can complement the stocking in a seasonal display.
Ways to Display Your Finished Crochet

- Hang the stocking from a mantel, staircase railing, wall peg, or decorative ladder using its crocheted loop.
- Place several stockings together in the selected versions for a coordinated family display.
- Fill the stocking with small wrapped treats, ornaments, stationery, or other lightweight gifts.
- Use one stocking as a decorative holder beside a holiday centerpiece.
- Give a personalized stocking as a handmade seasonal gift.
- Pair the stocking with other handmade accents, such as crocheted red roses, for a festive gift basket or craft display.
Caring for Your Crochet Project
- Dust the stocking gently with a soft cloth or a low-suction handheld vacuum attachment.
- Spot-clean carefully rather than soaking the finished stocking, especially around the embroidered design.
- If cleaning is necessary, follow the yarn manufacturer’s care instructions for the Bernat® Super Value™ yarn.
- Allow the stocking to dry completely before storing it.
- Keep it away from excessive heat, which can affect the yarn and embroidery.
- Store it flat or loosely supported in a dry container so the toe and heel do not become crushed.
- Avoid placing heavy items inside the stocking, since excessive weight may stretch the hanging loop or distort the shape.
Tips for Better Results
- Measure the cuff as you work. The finished cuff strip should measure 14″ [35.5 cm] before joining, so use a tape measure rather than relying only on row count.
- Work every cuff stitch in the back loop only. This creates the ribbed texture and is important for both the cuff rows and the cuff join.
- Keep the 46 single crochets evenly spaced. Even spacing around the cuff edge helps the leg remain balanced and makes the later heel placement easier.
- Use the stitch marker carefully. The marker identifies the point used during the joining-round decreases, so replace it if it becomes displaced.
- Count the heel rows. The heel begins with the 23-stitch section, continues for 2″ [5 cm], and then uses the specified eight shaping rows.
- Check stitch counts after shaping. The heel ends with 15 sts, the joining round has 52 sc, and the foot decreases continue until 44 sts remain.
- Protect the stocking during embroidery. Insert cardboard before cross-stitching so the needle does not catch the opposite side.
- Center the chart before stitching. Mark the center sc approximately 2″ [5 cm] below the beginning of the Leg and align it with the chart’s center stitch.
A decorative companion project such as a mandala crochet doily can also help reinforce careful center marking and symmetrical placement skills.
Creative Ways to Customize Your Project
These are optional styling ideas and do not change the approved pattern instructions:
- Choose the snowman, Santa, or tree colorway according to your holiday décor.
- Make coordinated stockings in different versions while keeping the same construction.
- Use the stocking as part of a red, green, oatmeal, and winter-white display.
- Add personalized embroidery only after completing the supplied chart, ensuring that any extra stitching does not interfere with the stocking structure.
- Combine the stocking with handmade floral décor, such as a blooming bouquet crochet design, for a cozy handmade holiday room.
- If substituting yarn, remember that a different yarn or hook can change gauge, dimensions, texture, and yarn requirements. Use the hook size needed to obtain the intended gauge and check the measurements throughout construction.
Frequently Asked Questions
Is this stocking suitable for a beginner?
It is approachable for crocheters who are comfortable with chains, slip stitches, single crochet, joined rounds, and basic decreases. The heel and toe require careful counting, while the cross-stitch embroidery is completed after the crochet is finished.
Which yarn is recommended?
The supplied pattern uses Bernat® Super Value™ yarn in the specified colors and quantities for the selected version. Each listed color is provided as 1 ball.
What hook size should I use?
Use a U.S. H/8 (5 mm) crochet hook, or the size needed to obtain gauge.
How many stockings does the material list make?
The supplied quantities and instructions are for one stocking in the selected version. Make additional stockings by gathering the listed materials again.
Can I change the color version?
Yes. The pattern provides Version I Snowman, Version II Santa, and Version II Tree color selections. Use the chart that corresponds to the version you crochet.
When is the embroidery added?
Cross-stitch embroidery is added during finishing, after the stocking, toe, and hanging loop are complete. Insert cardboard first to help prevent catching stitches.
How do I center the cross-stitch design?
Measure approximately 2″ [5 cm] down from the beginning of the Leg, mark the center sc of the Stocking Front, and line up that stitch with the center stitch of the chart. Each chart square represents 1 sc.
Can I use a different yarn?
A substitution is possible, but it may affect gauge, finished measurements, texture, and yarn requirements. Use the hook size needed to obtain gauge and compare your work with the stated measurements as you proceed.
How should I store the finished stocking?
Store it clean, dry, and loosely supported or flat. Avoid excessive heat, heavy contents, and pressure that could distort the toe, heel, embroidery, or hanging loop.
Conclusion
This Crochet Cross Stitch Christmas Stockings Pattern combines practical shaping with colorful holiday embroidery, making it suitable for mantel décor, gifting, and family displays. Choose one of the three supplied versions, follow the stitch counts carefully, and personalize the finished piece through color and thoughtful presentation. For additional inspiration, compare this design with Bernat cross-stitch Christmas stockings and these free crochet Christmas stocking patterns.






